CF2
TORQUE 12 kNm
ENGINE POWER 25 kW
MAX DEPTH 12 m
MAX DIAMETER 800 mm
TOTAL WEIGHT

4,5 t

 

Hydraulic piling rig CF2

Provided with a special mast divided in two sliding sections with pull-down force given by the counter-slide device to lower the mast group and achieve the lowest headroom working position. The CF2 is equipped with a short locking kelly bar which grant it to reach 12m deep working even under 2800mm. With a max undercarriage width of 1550mm, the CF2 can move in very narrow places and restricted areas. It could even get into the entrance door of civil buildings! Moreover the undercarriage is provided with rubber crawlers to work safely over fragile or luxury floors.

 
 
CF2
TORQUE 12 kNm
ENGINE POWER 25 kW
MAX DEPTH 12 m
MAX DIAMETER 800 mm
TOTAL WEIGHT

4,5 t

 

Hydraulic piling rig CF2

Provided with a special mast divided in two sliding sections with pull-down force given by the counter-slide device to lower the mast group and achieve the lowest headroom working position. The CF2 is equipped with a short locking kelly bar which grant it to reach 12m deep working even under 2800mm. With a max undercarriage width of 1550mm, the CF2 can move in very narrow places and restricted areas. It could even get into the entrance door of civil buildings! Moreover the undercarriage is provided with rubber crawlers to work safely over fragile or luxury floors.

 
 
 
 
Request information on the machine
 
 
Richiedi Informazione sulla machchina
 
CONTACT US

Dichiaro di aver preso visione dell'informativa privacy relativa al trattamento dei miei dati personali.